See details for work with faux fur at How to use the
CD.
YOU NEED: faux sheepskin; 2 buttons; leather braid (cord) for loops.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 2.5 cm for front edgings/lapel
edges/garment/sleeve hems/collar fall/pocket upper edge. 1.5 cm for
side/shoulder edges, armholes/sleeve caps seams and collar joining seam. Lap
seam (see detailed instructions) for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Sheepskin:
1. Side upper front part – 2 pieces
2. Side upper
back part – 2 pieces
3. Center upper back part – 2 pieces
4. Center upper
front part – 2 pieces
5. Lower back part – 1 piece
6. Lower front part – 2 pieces
7. Collar – 1 piece
8. Upper sleeve – 2 pieces
9. Lower
sleeve – 2 pieces
10. Pocket
– 2 pieces
INSTRUCTIONS:
1. Stitch darts into center upper front
parts.
2. Fold pocket upper edge allowance into
right side and topstitch it.
3. Mark pocket place on lower front
part and stitch the pocket according to marks.
4. Stitch
side upper front part to center upper front part with lap seams.
5. Stitch
front upper/lower edges together with lap seams.
6. Stitch upper
back relieves with lap seams.
7. Stitch middle back edges with lapel seam.
8. Stitch
back upper/lower parts together with lap seam.
9. Stitch shoulder/side
edges.
10. Stitch upper/lower sleeves together with sap seams. Stitch sleeve
seams.
11. Stitch sleeves into armholes according to notches.
12. Fold collar fall/corners
allowances into suede side and topstitch them.
13. Fold lapel edge/front
edgings/garment hem into right side and topstitch them.
14. Stitch
the collar to the garment with closed seam.
15. Stitch
loops to right front edging, sew buttons to left one.