FABRIC: lightweight
fabric with elastan, lace.
SEAM ALLOWANCES: 1 cm for all seams.
IF
THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE
CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print
paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric pieces).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
MATCHING!
CUTTING:
FABRIC:
1. Centre
back – 2 pieces
2. Side
back – 2 pieces
2. Cup – 2
pieces
3. Front inset – 1 piece
4. Centre front – 2 pieces
5. Middle front – 2 pieces
6. Side front – 2 pieces
7. Back tie – 2 pieces
8. Front tie – 2 pieces
INSTRUCTIONS:
1. Stitch and neaten the
front centre seam; press the seam.
2. Stitch the front curved
edges; neaten the seams; press the seams.
3. Neaten the cup front
edge; press the seam allowances under. Gather the cup lower edge; stitch the
cup to the front piece; neaten the seam; press the seam allowances downwards.
4. Stitch the back pieces
together. Neaten the seams; press the seam allowances to the side pieces.
5. Stitch the back centre
edges; neaten the seam; press the seam allowances to the right piece.
6.
Stitch the garment side edges; neaten the seams and press them backwards.
7. Neaten the back upper
edge and the armhole edges. Press the seam allowances under and topstitch 0,5
cm from the fold.
8. Fold the tie piece in
half lengthways and stitch 1 cm from the foldline, stitch the tie one end. Turn
the tie right side out; press and stitch to the garment.
9.Neaten the garment hem; press the hem under
and topstitch.
10. Cut the lace decorative inset.
Fold the inset top edge under and topstitch with zigzag. Topstitch the inset to
the caps with zigzag also.