MATERIAL:
wool or semi-wool, combined suit material.
YOU
NEED: wool
crepe of 150 αm
width; lining; fusing; zipper; 1 button.
CUTTING:
Fabric:
1.
Front panel - 1 folded detail
2.
Back panel - 2 details
3.
Waistband - 1 detail
Lining:
Front panel - 1 folded
detail
Back panel - 2
details
Fusing:
waistband.
INSTRUCTIONS:
1.
Strengthen the waistband with fusing (press thermal interfacing on the wrong
side with hot iron).
2.
Sew darts into front and back panels and press toward
center.
3.
Sew back center seam between zipper and vent marks. Press slit edges. Topstitch
zipper under upper slit edges that teeth are covered.
4.
Sew side seams.
5.
Sew darts and seams of lining panels. Pull lining into the fabric skirt left
sides together. Fold under the closure allowance and sew to zipper band. Tack
the lining along waistline edge.
5.
Fold the waistband along the center and topstitch ends and closure allowance.
Fold under the seam allowance of the open waistband edge overlapping the joining
seam and topstitch closely along the edge. Work the button
hole.
6.
Sew the hem. Press the one-piece facing of vent (left back panel) on bent line
to the left side and sew to hemline. Topstitch the longitudinal side of vent
allowance (right back panel) as narrow as possible. Topstitch the left back
panel on the top of vent by diagonal catching vent allowance.
7.
Undersew the lining so that it is 2 cm shorter than fabric skirt. Fold under the
slit allowance and sew near the vent.