MATERIAL: suit material, crepe.
YOU NEED: gabardine of 150 αm width; clue interfacing; zipper; large
round buckle.
CUTTING:
Fabric:
1. Front panel - 1 folded detail
2. Back panel - 2 details
3. Front facing -1 folded detail
4. Back facing - 2 details
5. Belt loop - 1 detail (is cut into 4 loops)
6. Waistband - 2 details
Clue interfacing: facings, waistband.
INSTRUCTIONS:
1. Sew darts into front and back panels, press them
towards center.
2. Sew back center seam from the zipper mart down to
slit mark. Sew side seams. Sew zipper in.
3. Sew back center seam and right side seam on
facings. Topstitch the facings on panel waistlines of right sides together. Cut
allowances up to 0.5 cm width, lay them under the facings and topstitch closely
along the edge. Fold facing into wrong side, press upper edge. Fold facings
under, sew them to zipper band. Additionally, sew lower edges of facings to
seam allowance and dart depths.
4. Press long edges of belt loop to left and
topstitch. Cut into four pieces. Turn pieces in short sides and closely
topstitch.
5. Turn over hem allowance along hemline, press, then
topstitch.