MATERIAL: well-draping material, for example, viscose, crepe,
and dense knit fabric.
YOU NEED: crepe of 150 ñm width; zipper.
CUTTING:
Fabric:
1. Front panel -2 details
2. Back panel - 2 details
3. Front facing - 1 folded detail
4. Back facing - 2 details
Clue interfacing: facings.
INSTRUCTIONS:
1. Sew darts and press them towards center.
2. Sew front center seam up to slit mark.
Press seam allowance apart, press slit allowance to
the left side.
3. Sew back center seam up to zipper mark.
4. Sew side seams.
5. Sew zipper so that teeth are covered on both sides.
6. Turn over hem allowance along hemline, press. Face
corners “in envelope.” Topstitch the front center seam. Continue to topstitch
along slit edges and hem at 3 cm distance with a double needle.
7. Sew facing side seams. Sew facings and waistband
right sides together. Cut closely seam allowance closely to stitches, turn to
topstitch and topstitch to edge. Turn facing to left side and sew it to dart
depths and seam allowance. Turn under facing edges and sew to zipper band.