YOU NEED: soft wool or silk of 150 cm width; a
zipper; 1 button; fusing.
CUTTING:
Fabric:
1. Panel –
2 pieces
2. Flap – 4
pieces
3. Waistband
– 1 piece
Lining:
1. Panel –
2 pieces
Fusing: apply the fusing to wrong part of
waistband and two flap details.
INSTRUCTIONS:
1. Sew
front, back and side darts, press them to the center.
2.
Overstitch the flap, turn it out and topstitch along the edge. Topstitch the
flap on the front dart (so the dart would be fully under the flap)
3. Sew back
middle seam between closure notch marks and vent marks. Sew the zipper in.
4. Sew
front middle seam to slit mark. Press allowances apart.
5. Press
the hem to wrong side and sew. Press the vent one-piece facing (back left panel)
along the bending line into wrong side and sew it to hem. Sew the vent
allowance’s long side (back right panel) as narrow as possible. Topstitch back
left panel upward diagonally, catching vent allowance.
6. Sew the
seam into lining panel, tack pleas. Insert the lining into the garment, wrong
sides together, and tack upper edges. Turn lining closure slit under and sew it
to zipper braid.
7. Sew the
waistband to garment upper edge, leaving ejecting allowance for closure at
waistband back end. Overstitch waistband ends. Turn the waistband inner edges
under and topstitch from right side strictly along joining seam. Make a
buttonhole into waistband left end, sew the button on the right one.
8. Sew the
lining hem and fix it near the vent.